CHOCKFAST® GRAY
NO. 656E
DESCRIPTION
CHOCKFAST GRAY (PR-610FR) is a specially formulated 100% solids, two component inert filled casting compound developed for use as a chocking or grouting material. The compound is designed to withstand severe marine and industrial environments involving a high degree of both physical and thermal shock. The compound is non shrinking, non burning and has a very high impact and compressive strength. Years of successfull inservice experience have shown the use of PR-610FR to be a far superior yet less expensive method of establishing and retaining precise equipment alignment under extreme conditions. When poured as a continuous chock under deck equipment, CHOCKFAST GRAY also eliminates all rat shield fabricating work as well as providing a corrosion proof moisture seal. PR610FR is approved or accepted for its intended marine uses by A.B.S., Coast Guard, Lloyd's Register and other regulatory agencies.
APPLICATION
CHOCKFAST GRAY was developed as a chocking or grouting compound for use under marine deck machinery, pumps, generators and steering gears. Industrially, the compound is used under diesel engines. generators. compressors, pumps, turbines, bearing blocks, crane rails and numerous other applications. PR-610FR requires no special tools or special skills as does chocking with steel. When cast, CHOCKFAST GRAY flows readily into chock area filling all voids and conformning to all irregularities. This eliminates the machining of base plates or foundations for a perfectly fitted chock.
When used as a grouting compound for shoreside machinery, the CHOCKFAST GRAY provides perfectly even support without the tedious hand packing associated with conventional cement grouts. Because the compound flows readily, much thinner cross sections can be used. The compound is also completely chemical and oil resistant, will not powder or crack with age, weathering, or freeze-thaw cycling, and will seal the mounting surfaces protecting them from deterioration. Steel soleplates and rails between the machinery and the concrete foundations are not necessary with CHOCKFAST GRAY.
Other successful applications of CHOCKFAST GRAY include mounting of crane rails, chocking of crane bull gears, chocking and grouting of precision milling machinery and sealing of cable penetrations.
PHYSICAL PROPERTIES
| COEFFICIENT OF LINEAR THERMAL EXPANSION: Temperature Range 0° to 60°C (32° to 140°F) |
30.3 x 10-6/C° (16.8 x 10-6/F°) |
ASTM D-696 |
| COMPRESSIVE MODULUS OF ELASTICITY: | 36568 kg/cm2 (520,000 psi) |
ASTM D-695 |
| COMPRESSIVE STRENGTH: | 1125 kg/cm2 (16,000 psi) |
ASTM D-695 |
| CORROSION RESISTANCE | Pass FTM 151A @ 96 hrs. 0.5% NaCL 35°C (96°F) Fog |
|
| CURE TIME: | 18 hrs. 30°C (85°F) 24 hrs. 18 °C (65°F) |
|
| HARDNESS - BARCOL: | 35-40 | ASTM D-2583 |
| FIRE RESISTANCE: | Self-extinguishing | ASTM D-635 |
| IZOD IMPACT STRENGTH: | 0.32 Newton m/cm 7.2 in.lbs./in. (greater than concrete) |
ASTM D-256 |
| LINEAR SHRINKAGE: | 0.0003 mm/mm (0.0003 in/in) |
ASTM D-2566 |
| PACKAGING (Nominal Weight., Actual Volume) | 11 lbs. - 3.06 liters (187 cu.in.) 48 lbs. - 13.37 liters (816 cu.in) |
|
| POT LIFE: | 30-40 mins. @ 21°C (70°F) | |
| SHOCK RESISTANCE: | Pass MIL-S-901C (Navy) High Impact Shock Test, Grade A, Type A, Class 1 |
|
| SPECIFIC GRAVITY: | 1.82 | |
| TENSILE STRENGTH: | 281 kg/cm2 (4,000 psi) |
ASTM D-638 |
| THERMAL SHOCK: | Pass -6.5°C to +93°C (20°F to 200°F) |
|
| VIBRATION: | Pass 33 cps @ 0.51 mm (0.02 in.) amplitude Total cycles 237,600 |
|
 130 Commerce Drive - Montgomeryville, PA 18936 215.855.8450 - Fax 215.855.4688 |
|
